HKS Hipermax IV GT Fahrwerk - Nissan Skyline R32 GTR

Artikelnummer: 80230-AN008
HAN: 80230-AN008
Kategorie: Fahrwerk
Hersteller: HKS

2.099,00 €

inkl. 19% USt. , zzgl.

Sofort verfügbar
Lieferzeit: 14 Werktage (DE - Ausland abweichend)

Beschreibung

Application

Specification

Engine	RB26DETT
Model Year	89/08 - 94/12
Remarks	V-Spec II

	FRONT	REAR
Damping force adjustment	30 steps	30 steps
Base valve	-	-
Height adjustable lower bracket	○	○
Upper mount	Rubber	Rubber
Inverted/Normal type	Normal	Normal
Damper/Spring layout	Coilover	Coilover
Spring rate change at factory	Possible	Possible
Damping force adjustment with wire	-	○
Helper spring (Spring rate N/mm)	-	○ ( 19.8 )

Ride Height

		Factory *2	Test data	Adjustable range High - Low *3	Drivable range High - Low *4
FRONT	Ride height *1	657	←	695 ～ 631	695 ～ 638
FRONT	Against stock	-38	←	0 ～ -64	0 ～ -57
REAR	Ride height *1	651	←	671 ～　582	671 ～　604
REAR	Against stock	-20	←	0 ～ -89	0 ～ -67

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

	F	R
Spring rate N/mm(kgf/mm)	69 ( 7 )	69 ( 7 )
Free height (mm)	250	200
Spring type	Straight	Straight
Recommended range to change spring rate N/mm(kgf/mm)	±20 ( 2 )	±20 ( 2 )

Specification of damper

	F	R
Damping force (Rebound/Damping)N*	863 / 186	588 / 216
Default position of dial	15	15
Remaining damper stroke (Rebound/Damping)mm	37 / 63	53 / 82

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

	F				R
	Default	Test	Drivable limit High *	Drivable limit Low *	Default	Test	Drivable limit High *	Drivable limit Low *
Length of case (mm)	272	←	309	270	395	←	413	377
Spring Set length(mm)	234	←	234	250	250	←	250	274
Length to ride hight adjuster (mm)	25	←	62	7	62	←	80	20
Lever ratio	1.03				1.12

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

		F	R
Vehicle weight kg		-	-
Tire size (Air pressure) kPa		245 / 40 - 18 ( 230 )	245 / 40 - 18 ( 230 )
Wheel size		9 JJ × 18 inset 22	9 JJ × 18 inset 22
Alignment (Toe/Camber)	Test data	out 1 mm / -2°00'	in 5 mm / -2°33'
Alignment (Toe/Camber)	Standard value	0 ～ in 2 mm / -0°55' ± 45'	in 2 ± 2 mm / -1°05' ± 30'

* Test data at HKS.

Artikelgewicht:	30,00 kg